2.5KW Short Outdoor Infrared Heater, 2500W Plug-in Outdoor Porch Heater

1/5

Kelray Outdoor Infrared Heater - I-25 (2500W)

€728,95

Reliable shipping

Flexible returns

Settle in for the evening. 2,500W for outdoor living.

From an unhurried meal to a catch-up with friends, the Kelray I-25 brings a welcoming focus to your outdoor seating and dining area. This 2,500W single-element infrared heater combines a 1,010 mm body with 316 stainless steel construction, replaceable heating components and straightforward on/off operation.

2,500W output from one replaceable quartz element
240V supply with a rated current of 10.4A
Approximate coverage: 8 × 8 ft (2.5 × 2.5 m) in a partially enclosed setting
Wall, ceiling or flush mounting to suit your layout
Limited five-year heater-body warranty; separate reflector and element terms apply

For the way you unwind outside

The I-25 offers 2,500W in the same body length as the I-20. It is worth considering when your heating plan calls for that additional output while retaining the same physical footprint. Position it around the table or seating zone you use, with coverage and exposure considered together.

There is no need to change what you love about your patio to plan its heating. Start with the furniture layout and available mounting positions, then match the heater to them. Corrosion-resistant 316 stainless steel and a replaceable quartz element make ongoing care and service part of the ownership story.

Infrared heat warms people and surfaces in its path. Position the heater over or toward the area you actually use. Wind, mounting height and the openness of the space affect comfort and coverage.

I-25 technical specifications

Kelray I-25 — 240V configuration
Model / series	Kelray I-25 / Ideal Series
Heater type	Electric infrared radiant heater
Rated power	2,500W (2.5kW)
Supply / current	240V / 10.4A
Elements	1 replaceable quartz element, 2,500W
Infrared wavelength	Medium-wave
Construction	316 marine-grade stainless steel; polished aluminium rear reflector
Weather rating	IPX4 (splash resistance)
Heater length	1,010 mm (approximately 39.8 in)
Approximate heat coverage	2.5 × 2.5 m (approximately 8 × 8 ft), partially enclosed
Mounting	Angled wall, ceiling or flush mount with the required recess kit and firebox
Installation	Permanent hardwired installation by a qualified electrician
Finishes	Uncoated stainless steel, black or white
Limited warranty	Heater body: 5 years; rear reflector: 2 years excluding wear and tear; elements: 1 year for material defects

208V elements are available for suitable installations. Confirm the correct element and electrical configuration with Kelray before ordering for a 208V supply.

Plan your installation

Share your seating or dining layout, area dimensions, mounting height, number of open sides and a photo. We can help you decide whether the I-25 or a neighbouring Ideal Series model fits the plan. Coverage is a planning estimate, not a guaranteed temperature or a substitute for the installation clearances.

Keep the heater's long axis horizontal. Flush mounting requires the purpose-designed recess kit and a firebox rated for at least one hour. Your electrician must follow the installation manual and local requirements for wiring, protection and clearances. Confirm mounting height with Kelray before installation.

The single element is operated with a suitable on/off switch. Discuss compatible controls and mounting accessories with Kelray and your electrician when planning your system.

Support for the years ahead

Designed and manufactured in New Zealand, with final assembly, sales and support for North America from Kelray Heating Canada in British Columbia.

Replacement elements are available. Regular cleaning and correct installation are conditions of the limited warranty; physical damage is excluded. Read the full terms in the installation guide.